……….. I’m going to answer that but first I have to ask what the status of your motor is.
Are the exhaust crossover port on your intake manifold blocked off and is the intake bedded with a fiber gasket set completely glued in with Permatex Ultra-grey? ….
.. If not you must get the parts and do the labor to do that all.
Have you assured you timing chain is tight. A loose chain screws the whole system.
What is the status of your fuel delivery system? There’s aver 50ft. of vent hose too small to vent 2 25 gallon 4 1/2″ deep steel fuel tanks. You need new hoses, replumbed vent system, cleanable filter and electric fuel pump mounted on the outside of the frame rail.
NOW, YOU PICK UP THE 550 CLASSIC “MASTER PACK” FiTech kit, then a care package of the bits to adapt the system to our Blechfire 45 year old motors.
Next will be the installation……..simple right?
So later today here I’ll price out the Master Pack from FiTech and the care package we supply. But remember until you address the issues above you cannot do the fi install.
and here a pic of a motor with that done. Yep, there’s a pile of other stuff redone in that pic above meaning there will probably be a few other things you may want to do…… No, the MacDaddy dash doesn’t need to be done or other stuff but don’t ya want to?
Theres little doubt that this system will work…….because many things are considered.
…….
Same situation with the CVF Serpantine belt system…….you need the Semlax ACR-160, a new set of power steering hoses, a set of new dash AC hoses, an inlet and an outlet water pump hose, a small water pump spacer and then a decision 0 what you want to do with the radiator and fan.
See, these upgrades need to be adapted to our coach so the “price of that” will be different on each coach based on what’s there and useable.
But……ill give you costs of these things later today so come back later today for those costs…..and I promise I WILL be back later to give you all of this…….
……Please observe Veterans Day in a way you feel expresses your thanks for our American freedoms….
