While focusing on the interior bulkhead wall build, we also have new wiring we’re running and getting the checked out and cleaned up original Onan…. see, I’m not a “Troll” killer.. I like the ole machines…. that is until they start getting finicky…. then it’s… Off which her head, put in a Honda…… but hey, their generator worked really well and maybe it will do the job for a while Being a retired electrical engineer type, He’s going to rewire all the old power and output wiring on the unit.
So the walls are going in We have sealed the backs of each piece with a colored low VOC water barrier finish and now we piece it together like a jig saw puzzle First wall, centered, leveled to the coach and secured is the hardest thing… everything will feed off of that surface Wrapping the bath module is first. I would love to say it was planned but we found a way to get an extra inch or so at the center of the hallway. Being actually a useable dual use space…. wallway or dressing area….. having a bit more elbow room would be a good thing. Our bath module is tighter to the sidewall by @ 1 1/2″ saving some space to put in the hallway… stay tuned and lets see how that works…. Having the first corner connected on the passenger side going into the bedroom… hey it’s a terrible pic but go take a look at that corner is you still have that original finish Really looks like it hey, right down to the flushed phillips screw holding that back wall in! That radius edge has always been the difficult thing to reproduce….. there it is…..
Stay tuned for more.
Adrian’s Sport Billy is out of the hanger over getting it’s new dash AC system. The unit will be a heat/cool unit built into this awesome Mac Dash When we built the dash note there are no original vents in the dash pad. We took them out when we removed the entire dash heat/cool system 5 years ago. This should be a sweet looking dash….. stay tuned, hey I know 1 guy that will!.
OK, the day is on, I’ve lost my tune-up bag…. dangit we spend a bunch of time looking for stuff!!!! Gotta get better… see ya tomorrow…..