With Jared,Jason and I on the project, the new system is in the dash. First the big ole heater box had to come out.
6 big bolts hold that box in…..as if I guess they thought it would fall out! Hey but it’s gotta go
and with that lug outa the way along with the hoses, lines and wires there’s a big hole made up front
Now modify the fire wall, build the new heater box this time out of aluminum and the new electric servo heat/cool module
all gets mounted in place of the old one
ccomplete with a new, hi capacity condenser. On the inside of the coach, I had to all but strip out all the old vents, wires, etc. Of the old system to make room for the new stuff. The Mac dash I installed 18 years ago…..WITH service loop wiring unplugged and was out of the way with no problems. With the 4 outlet ducks coming into the dash from the new unit in its box, we have one vent for the passenger, 2 vents down the middle and 1 for the driver
all routed through the dash
and with the donut pad and Mac dash in the new digital control panel fit into the original location with a little help
the new box connected up today we see if we get cubed and crushed ice…….stay tuned and we’ll see ya tomorrow……..