Carb to fuel pump insulated hose
This quality made fuel line reroutes the fuel away from the thermostat housing, it has a "pyrosleeve insulation and is made of stainless braided Teflon hose with professional plated steel cremped on and properly clocked fittings. Will work with 455 or 403 motors.
Step 1: thread on loose the 45 deg.
fitting to the top of the mechanical fuel pump
letting the hose point forward. Then rotate the fitting on the mechanicaql
fuel pump 180 deg. to the left while bringing the hose up the front of the block
and back around to the carb inlet
.
Thread the fitting into the carb loose
go down and tighten the hose onto the carb then come up to the carb and tighten
that fitting. Fire up your motor and carefully check for fuel leaks.